Permits

Plumber, Electrician or Handyman? Wood Buffalo Permit Rules

By [OWNER NAME]·January 20, 2026·Last updated January 20, 2026

The short version

A handyman handles repairs that don't require a permit or a licensed trade. When a job crosses into permitted plumbing, electrical, or gas work, it belongs with the right licensed professional — and I'll tell you that honestly rather than do it anyway.

Plumbing permits in the RMWB

In the Regional Municipality of Wood Buffalo, a plumbing permit is required to install, renew, remove or change plumbing equipment or a plumbing system. Permits are applied for by an RMWB-licensed plumber, or by the homeowner under a homeowner permit — and that homeowner permit is cancelled if a contractor does the work.

What that means in practice: repairs that don't change the plumbing system — a dripping faucet, a running toilet, a small leak, a fixture swap that doesn't move pipes — typically don't need a permit. Anything that installs, renews, removes or changes plumbing equipment or a system does.

If you're unsure whether your job needs a permit, confirm with RMWB Safety Codes at inspections@rmwb.ca.

Electrical and gas work

Electrical work and gas work need permits and licensed trades. Adding an outlet behind a TV, changing a panel, running a new circuit, or anything to do with gas lines is not a handyman job — it needs a licensed electrician or gas fitter and the appropriate permit.

This is a safety line, not a preference line. The cost of doing it wrong is far higher than the cost of the right trade.

When a handyman is the right call

A handyman is the right call for:

  • Dripping faucets and running toilets (repairs, not system changes)
  • Small leaks and fixture swaps that don't move pipes
  • Drywall, painting, trim and patching
  • TV mounting, furniture assembly, shelving
  • Weatherstripping, caulking, door and cabinet repairs
  • Tile regrouting, recaulking, and flooring that doesn't trigger a permit

How I handle the line

I handle the repairs that don't need a permit, and I refer permit work to licensed plumbers, electricians and gas fitters. [I will confirm exactly which jobs I do.] If a job turns out, on site, to need a permit, I'll stop and tell you rather than do it anyway.

Frequently asked questions

When does plumbing need a permit in Wood Buffalo?

When you install, renew, remove or change plumbing equipment or a plumbing system. Permits are applied for by an RMWB-licensed plumber, or by the homeowner under a homeowner permit (cancelled if a contractor does the work). Repairs that don't change the system typically don't need a permit.

Can a handyman do electrical work?

No — not permitted electrical work. Electrical work needs a licensed electrician and a permit. If a job turns out to need one, I'll refer you.

I'm not sure if my job needs a permit.

Confirm with RMWB Safety Codes at inspections@rmwb.ca. When in doubt, check first — it's far cheaper than a do-over.

What plumbing repairs can you do?

Dripping faucets, running toilets, small leaks, and fixture swaps that don't move pipes — the repairs that don't need a permit. [I will confirm exactly which jobs I do.]

Need a hand with this? Get a free quote

Tell us what you need done — we'll get back to you with a clear quote.

CallGet a free quote